Gas Line Connection, To Test Valve Pressures

Initial Installation

QUALIFIED INSTALLERS ONLY

GAS LINE CONNECTION:

Warning: Only persons licensed to work with gas piping may make the necessary gas connections to this appliance.

Gas Line Connection:

•This fireplace is equipped with a certified flexible pipe located on the right side of the unit, terminating in a 3⁄8” male NPT fitting. Consult the local authorities for local codes or use the CAN/CGA B149 (1 or 2) installation code in Canada. In the US, gas installations follow either local codes or the current edition of the National Fuel Gas Code ANSI Z223.1.

•The efficiency of this unit is a product thermal efficiency rating determined under continuous operating conditions and was determined independently of any installed system.

		��		��
		��		��
		��		��
		��
TP TH		OUT	IN
TP TH
TP	H	O
TP	I	L	OF
	I		OF
			F
			P
TH			I
			L
			T	O
			T	O
			NO
T	P
T	I
OL
��	��		��
��	��		��

Figure 26: Fully Labeled Gas Valve.

The appliance and its’ shut-off valves must be disconnected from the gas supply piping system during any pressure testing where the pressure exceeds 1⁄2 psig (3.45 KPa) or the valve will be damaged.

The unit must be isolated from the gas supply piping system by closing its’ individual manual shut off valve during any pressure testing of the gas supply piping system at pressures equal to or less than 1⁄2 psig (3.45 KPa).

Always check for gas leaks with a soap and water solution after completing the required pressure test.

TO TEST VALVE PRESSURES:

The pressure taps are located on the top right of the valve.

•Turn set screw 1 turn counterclockwise to loosen.

•Place 5/16 in (8 mm) I.D. hose over the pressure taps.

•Check pressures using a manometer.

•When finished, release pressure, remove hose and tighten set screw.

Table 4: Pressure and BTU Information.

Main Burner	Natural Gas	Propane Gas
	(in W.C./KPa)	(in W.C./KPa)

Orifice:	#38 DMS	#52 DMS

Manifold Press:	3.8 / 0.95	11.0 / 2.74

Min. Manifold Press:	1.1 / 0.27	2.7 / 0.67

Max. Supply Press:	7.0 / 1.74	13.0 / 3.28

Min. Supply Press:	5.0 / 1.24	12.0 / 2.98

Max. BTU Input:	30,000/ 8.8 KW∙h	28,500/ 8.2 KW∙h

Min. BTU Input:	15,000/ 4.4 KW∙h	14,000/ 4.1 KW∙h

NEVER USE AN OPEN FLAME FOR LEAK TESTING.

C-11288 specifications

Enviro C-11288 is an innovative product that has garnered attention in the environmental technology sector. Primarily designed for sustainability initiatives, this advanced solution integrates a range of features and technologies that address the pressing concerns of waste management and resource conservation.

One of the standout features of Enviro C-11288 is its efficient waste processing capability. Utilizing state-of-the-art waste conversion technologies, it can transform organic and inorganic materials into reusable resources, effectively minimizing landfill use. The incorporation of advanced sorting algorithms ensures that the separation of recyclable materials is efficient and precise, enhancing the overall recycling process.

In addition to waste processing, the Enviro C-11288 is equipped with energy recovery systems. These systems capture and convert waste heat generated during processing into usable energy. This not only energy-optimizes the operation but also contributes to a lower carbon footprint, making it an environmentally friendly solution.

Another significant characteristic of the Enviro C-11288 is its scalability. Whether in a small community or a large industrial setup, the unit can be adapted to meet varying demands. This flexibility is further enhanced by modular design features, allowing users to expand or contract the system as needed without significant interruptions to their operations.

The technology behind Enviro C-11288 is also notable. Real-time monitoring and analytics capabilities enable users to track efficiency metrics, waste reduction rates, and energy consumption. This data-driven approach empowers organizations to make informed decisions about resource management and further improvements.

Durability and low maintenance are additional advantages provided by Enviro C-11288. Constructed with high-quality materials, the system is designed for longevity and can withstand harsh operational conditions. Low maintenance requirements translate into cost savings over time, further appealing to organizations with budget constraints.

Overall, Enviro C-11288 represents a significant advancement in environmental technology solutions. Its combination of waste management efficiency, energy recovery, scalability, real-time monitoring, and durable design positions it as a vital tool for organizations striving to implement sustainable practices while optimizing resource use. As industries continue to emphasize sustainability, the Enviro C-11288 offers a comprehensive solution that aligns with this critical goal.

Enviro C-11288 owner manual Gas Line Connection, To Test Valve Pressures

Models: C-11288