DECIDING WHERE TO LOCATE YOUR STOVE
DIMENSIONS:
Front Width: | 25"/ 63 cm | |
Rear Width: | 25"/ 63 cm | |
Height: | 29"/ | 74 cm* |
Depth | 21"/ | 53 cm |
( *not including vent coupling ) Shipping Weight: 256 lbs/116 kg
CLEARANCES: | FIG. 1 |
A. Side wall to stove | 12"/ 30cm |
B. Rear wall to stove | 4"/ 10cm |
C. Combustible to stove Top | 36”/ 91cm |
D. Floor to stove | 0"/ 0cm |
E. Corner clearance | 2"/ 5cm |
F. Alcove depth | 48"/ 122cm |
Maintain sufficient clearances |
|
for service and maintenance |
|
FIG. 2
•The stove should be located out of traffic and away from furniture and draperies.
•The stove should have sufficient access for its safe operation and maintenance.
•Locate a position where the flue system of the stove can be properly installed without damaging the integrity of the building. e.g. cutting a wall or ceiling joist.
•The stove can be installed on any standard flooring materials. i.e. Wood, carpet or linoleum.
•Check stove and flue system clearance requirements.
•Locate the stove where it can be accessed by a gas supply line.
•Locate the stove in a large and open room that is centrally located in the house. This will optimize heat circulation and comfort.
•As the stove is equipped with a convection fan, ensure that an electrical outlet is within 6ft. (1.8m) of the stove.
•These stoves can be installed in bedrooms.
(IN CANADA: must be installed with a listed wall thermostat)
(IN USA: see current ANSI Z223.1 for installation instructions.)
•The flow of combustion and ventilation air must not be obstructed.
4
