|
| Technical Support (FAQ) | |
|
|
|
|
| Problem | Possible Solution |
|
|
|
|
|
|
|
|
|
| Power LED is not ON | • Make sure the power button is ON. |
|
|
| • Make sure the power cord is properly connected to a grounded power outlet | |
|
| and to the monitor. |
|
|
|
|
|
| No Plug & Play | • Confirm that your computer is Plug & Play compatible. |
|
|
| • Confirm that your video card is Plug & Play compatible. |
|
|
| • Inspect the video cable and make sure that none of the pins are bent. | |
|
| • Make sure the Envision monitor drivers are installed |
|
|
| (ENVISION monitor drivers are available at: www.ENVISIONmonitor.com) | |
|
|
|
|
| Picture is fuzzy | • Adjust the Contrast and Brightness settings. |
|
|
|
| |
| Picture bounces or a | • Move electrical devices away from the monitor. They may be causing | |
| wave pattern is present | electrical interference. |
|
| in the picture |
|
|
|
|
| |
| Power LED is ON (green | • Press a key on the keyboard or wiggle the mouse to | |
| or orange light is ON) but | • Make sure the video cable is properly connected to the computer. | |
| there is no video or pic- | • Inspect the video cable and make sure none of the pins are bent. | |
| ture. | • Make sure your computer is operating correctly by pressing the CAPS | |
|
| LOCK key and observing whether the CAPS LOCK light turns ON or OFF. | |
|
|
| |
| Missing one of the pri- | • Inspect the video cable and make sure that none of the pins are bent. | |
| mary colors (RED, | • Make sure the video cable is properly connected to the computer. | |
| GREEN, or BLUE) |
|
|
|
|
| |
| Screen image is not cen- | • Adjust the Horizontal, Vertical or Zoom settings in the OSD window. | |
| tered or sized properly |
|
|
|
|
|
|
| Picture has color defects | • Adjust the User Color setting in the OSD window. |
|
| (white does not look |
|
|
| white) |
|
|
|
|
|
|
11 | 31MY02 | |
|
