EN-8500

4. Setting up MPAA rating Mode – Select MOVIE GUIDELINES from the V-Chip menu.

－Use Up/Down/Left/Right arrow buttons to move around the matrix

and press Menu button to change the value from “U” to ‘B” or “B” to “U”

－MPAA : Motion Picture Association of America [movie rating organization]

G

U

General Guidance

PG

U

Parental Guidance Suggested

PG-13

U

Parents Strongly Cautioned

R

U

Restricted Under 17 Requires

NC-17

U

No Children Under 17 Admitted

X

U

Adult

NR

U

Not Rated

5.Entering a new pin number - Select CHANGE PIN NUMBER from the V-Chip menu.

－Use numeric keys enter a new pin number. Pin number confirm menu appears.

－Again, use numeric keys to enter the pin number you entered at

the previous step. If the two pin numbers do not match,

“ Incorrect “ message will be displayed.

－If you forget your pin number, you can reset it to the default

“0000” by following the procedure below.

- Press Menu (VIDEO ADJUST will be selected by default). - Press Menu. Then press CH-down to highlight RECALL. - Press Menu to execute RECALL.

6.Blocking Screen

－If the incoming signal’s rating is higher than the one specified, the

screen will be blanked and the excessive rating message will be appeared.

NOTE: When the screen is blocked by V-Chip, and if you want to change V- Chip setting, press Exit button on the remote control or auto/exit key on the front cabinet of the monitor to bring up OSD Menu.

31