EN-8500

INSTALLATION INSTRUCTIONS

POWER CORD

Power Source:

1.Make sure the power cord is the correct type that required in your area.

2.This LCD monitor has a universal power supply that allows operation from100 - 240V AC voltage area (No user adjustment is required.)

3.Connect the Power Adapter’s DC cord into your LCD monitor’s power input socket. Then connect the male side of the power cord into a 3-pin AC power outlet. Connect the other end of the power cord to the Power Adapter. The power cord may be connected to either a wall power outlet or the power outlet socket on your PC, depending on the type of power cord supplied with your LCD monitor.

A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm￿ or H05VVH2-F2 3G 0.75mm￿) shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm￿) shall be used.

8