Epoq Steamer 11. Trouble shooting

11. Trouble shooting			Pairing	Problem	Solution
Pairing	Problem	Solution	Pairing was unsuccessful	Your Streamer is not in	Bluetooth must be off for the
				pairing mode when your	Streamer to enter pairing
				phone is trying to pair with it	mode. If the Bluetooth fades
My Streamer will not	Streamer’s key lock is activated	Deactivate the key lock located
					in and out, it is on and
enter Bluetooth pair-		on top of the Streamer. When
					you will need to turn it off
ing mode		the key lock slider reveals a
					by pressing the Bluetooth
		GREEN label, the keys can be
					button for about 2 to 3
		operated
					seconds. Now repeat the
	Streamer is out of power	Re(charge) the battery			pairing process
					Note: The Streamer’s pairing
	Bluetooth was on when you tried	Bluetooth must be off for the			mode is active for 120
					seconds or until the Streamer
	to put your Streamer in pairing	Streamer to enter pairing
					has been paired to your
	mode	mode. If the Bluetooth fades
					phone. If the pairing is not
		in and out, it is on and you will
					completed within the 120
		need to turn it off by pressing
					second, repeat the pairing
		the Bluetooth button for about
					process again
		2 to 3 seconds. Now repeat the
		pairing process		Wrong passcode was entered	Repeat the pairing process
My phone is not	Streamer is outside the range of	Move the two devices			and ensure that you use the
					passcode: 0000 (four zeroes)
finding the Streamer	your phone	closer together and reattempt
		pairing
	Streamer is already connected to	Make sure that all other
	other Bluetooth devices that are	nearby Bluetooth devices that
	active and within its range	have previously been paired
		to the Streamer are turned off
		before you repeat the pairing
		process

54 55