Easy Installation Procedure

The following must be completed before powering on your new system:

3-1. CPU Insertion

3-2. Jumper Settings

3-3. System memory Configuration

3-4. Device Connectors

Section 3-1

Step 1

Open the socket by raising the actuation lever.

Figure 2

		Step 2
		Step 2
		Insert the processor.
		Ensure proper pin 1 orientation by aligning
		the FC-PGA corner marking with the
		socket corner closest to the actuation arm
		tip. The pin field is keyed to prevent mis-
		oriented insertion.
		Don’t force processor into socket. If it does
		not go in easily, check for mis-orientation and
	Figure 3	not go in easily, check for mis-orientation and
	Figure 3	debris.
		debris.
		Make sure the processor is fully inserted
		into the socket on all sides.

		Page 3-3