4.Use the arrow buttons on the remote control or the , , or buttons on the projector to set these options:

■Position

See “Repositioning the Picture” on page 22.

■Zoom Caption

Adjusts both the length of the picture and its vertical position on the screen. You can adjust this function only when you’ve selected the Zoom aspect ratio.

■Keystone

Corrects vertical keystone distortion of the image (when your image looks like or

). This procedure makes the image smaller.

■Projection

Selects the projection method, as follows:

Setting

Projector position

 

 

Front

Projector is in front of the screen

 

 

Front/Ceiling

Projector is in front of the screen,

 

positioned upside-down on a shelf or

 

mounted upside-down on the ceiling

 

 

Rear

Projector is behind the screen

 

 

Rear/Ceiling

Projector is behind the screen, mounted

 

upside-down from the ceiling

 

 

■Setup Level (for component video, S-video, and NTSC video only)

If you are using the projector with non-standard video equipment that has different black level settings, use this setting to adjust the level of black in the image. See the documentation that came with your video equipment for more information.

5.Select the Operation option to make changes to these settings:

■Sleep Mode

When sleep mode is on, the projector turns off the lamp if it has not received any input signals for the specified amount of time (5, 10, or 30 minutes). You can also turn sleep mode off.

■Child Lock

When this feature is on, the projector will not come on unless you press and hold the P Power button on the control panel for three seconds. (The remote control operates normally.)

21