■Unplug the projector from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.

■This product includes a lamp component that contains mercury (Hg). Please consult your state and local regulations regarding proper disposal or recycling, and do not place in the trash.

■Unplug the projector during lightning storms or when not in use for extended periods.

■Don’t place the projector or remote control on top of heat-producing equipment.

■If you use the projector in a country other than where you purchased it, use the correct power cord for that country.

■Don’t stand on the projector or place heavy objects on it.

■Don’t use the projector outside of the required temperature range of 41 to 95 °F (5 to 35 °C). Doing so may cause an unstable display and could lead to projector damage.

■Don’t store the projector outside of the required temperature range of 14 to 140 °F (-10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage to the case.

Remote Control Information

You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front and rear of the projector. The projector may not respond to remote control commands under the following conditions:

■There is an object between the remote control and the IR receiver on the projector.

■Ambient light is too bright.

■Certain types of fluorescent lighting are used.

■Other equipment that emits infrared energy, such as a radiant room heater, is in the room.

If you experience problems, try the following:

■The remote control’s battery may be low on power; replace it.

■Dim the ambient lighting and/or turn off any fluorescent lights.

■Close any window coverings and/or move the projector out of direct sunlight.

■Turn off other equipment that emits infrared energy.

6