EPSON Stylus Pro 10600
Replacing Ink Cartridges
See page 3 for ink cartridge part numbers.
Checking Ink Levels
When one of the Ink Out lights is flashing (and INK LOW is displayed on the control panel), the corresponding cartridge is almost out of ink. Make sure you have a replacement cartridge.
Ink Out lights
When the light stays on and INK OUT is displayed, the cartridge is empty. You must replace it before you can continue printing.
Replacing a Cartridge
Before you start, make sure the printer is turned on. Then follow these steps:
1.Note the color of the Ink Out light that is on or flashing. This is the cartridge that you need to replace.
2.Push the indentation on the ink compartment cover to release the lock and open the cover. INK COMPART. OPEN appears on the display.
6.Hold the ink cartridge with the arrow mark on the left side and pointing toward the printer. Then insert the ink cartridge into the slot. Don’t force the cartridge.
3.Locate the slot containing the empty ink cartridge (corresponding to the INK OUT light). Press down on the top of the clamp and pull it forward.
4.Carefully pull the empty cartridge straight out of the printer.
5.Make sure the replacement cartridge is the correct color, and remove it from its package.
If you’re using Archival ink or UltraChrome ink, shake the cartridge gently before installing it.
10 - EPSON Stylus Pro 10600 | 9/02 |