■Motion Detection

Signal Æ Motion Detection

This setting specifies how signals are converted to progressive signals. Select a lower setting for slow-moving or still images (S) or select a higher number for video images (M).

Note: This setting applies only when viewing composite video, S-video, component video, or 480i or 575i RGB video.

■Noise Reduction

Signal Æ Noise Reduction

This setting reduces flickering of analog images. You can select from 3 levels of noise reduction.

Color Settings

If the image colors don’t look correct, you can adjust them using these settings. Use the first three settings described below to make the most visible changes. If you only need to make slight adjustments, you can fine-tune the picture with the remaining settings. Most color settings are stored separately for each image source and color mode.

■Color Saturation

Image Æ Color Saturation

Adjusts the color intensity of the image.

■Tint

Image Æ Tint

Shifts the color balance between magenta and green.

■Abs. Color Temp.

Image Æ Abs. Color Temp.

Shifts the color balance between red and blue, making the image appear warmer or cooler. You can also access this setting by pressing the ColorTemp. button on the remote control. See page 30 for more information.

38 Making Detailed Adjustments