■Startup Screen
Settings Æ Display Æ Startup Screen
Turn this setting off if you want to prevent the startup screen from appearing while the projector is warming up.
■Display Background
Settings Æ Display Æ Display Background
Changes the screen that’s used when the projector is not receiving a signal or when you press the Blank button to temporarily stop projection.
Other Setup Options
■Projection
Settings Æ Projection
You can select different options for projecting the image: Front, Front/Ceiling, Rear, Rear/Ceiling.
■Direct Power On
Settings Æ Direct Power On
Sets projection to start when the main power switch is turned on, without pressing the On button on the remote control or the P Power button on the projector.
Note: When direct power on is enabled, power surges that occur after a power outage can cause the projector to turn on.
■Video Signal
Settings Æ Input SignalÆ Video Signal
Leave this setting on Auto so the projector can automatically interpret the format, such as NTSC or PAL (for standard TV formats).
■Component
Settings Æ Input SignalÆ Component
Change this setting to match the type of equipment connected to the Component port. For component video, select Auto to let the projector automatically interpret the signal; or select YCbCr or YPbPr to manually select your video equipment’s signal.
44 Making Detailed Adjustments