Customizing Projector Features

Use the settings in this section to adjust the image size and position, suppress on-screen text, and select basic setup options.

Image Sizing

Before adjusting any of these settings, make sure you have already selected an appropriate aspect ratio for the type of picture you’re viewing (see page 28).

■Output Scaling

Signal Æ Output Scaling

For component video formats, this setting lets you see the edges of the image that are not normally visible in the picture (see page 63).

■Position

Signal Æ Position

Use the arrow buttons to fine-tune the position of the image on the screen.

■Zoom Caption Pos.

Signal Æ Zoom Caption Pos.

Lets you adjust the shape and position of the image so that subtitles are visible (available only if the aspect ratio has been set to Zoom). Use Zoom Size to adjust the proportions of the image, and Zoom Caption Pos. to move the image up or down. You can adjust output scaling before zoom position.

■Aspect

Signal Æ Aspect

This setting lets you change the aspect ratio of your image, and works the same as pressing the Aspect button on the remote control. See page 28 for more information.

Screen Options

■Messages

Settings Æ Display Æ Messages

Turn this setting off if you want to prevent on-screen messages from appearing (such as the no-signal message, or the identifying text that appears when you switch between image sources or color modes).

Making Detailed Adjustments 43