1
Setting up the Scanner 1-11
R4C5940
Rev. C
A5 size SETUP.FM
3/30/01 Pass 3
R
Proof Sign-off:
KOW K.Tsukagoshi J.Miyakoshi
M.Fujimori
NOC Lee
2. Connect the other end of the cable (Type A) to the USB port
on your computer, or USB hub.
Note:
❏USB cables enable you to connect the scanner whether your
computer is on or off. If you connect the scanner while your
computer is on, the “Add New Hardware Wizard” dialog box (for
Windows) or a message (for Macintosh) appears to prompt you to
install the scanner driver. Follow the instructions in Chapter 2 to
install the scanner driver.
❏Connect the USB cable to your computer, then install or start the
scanner software. Do not connect or disconnect the USB cable while
the scanner software is running.
❏Make sure no other interface is used.
Note for Macintosh users:
If you connect the scanner while your Macintosh® is on, a message
appears telling you that the scanner driver needs to be installed
(Mac OS® 8.X), or a message appears to prompt you to download the
scanner driver from the Internet (Mac OS 9). When this happens, click
OK (Mac OS 8.X) or Cancel (Mac OS 9) and then insert the EPSON
Scanner Software CD in the CD-ROM drive. Then follow the
instructions in Chapter 2 to install the scanner software.