Safety Instructions 3
R
Proof Sign-off:
KOW K.Tsukagoshi J.Miyakoshi
M.Fujimori
NOC Lee
R4C5940
Rev. C
A5 size INTRO.FM
3/30/01 Pass 3
❏Beware of electrical shock hazards.
❏Do not insert objects into any openings as they may touch
dangerous voltage points or short ou t parts.
❏Never disassemble or attempt to repair the scanner and the
option.
❏Do not expose to water or excess humidity.
❏Do not place multiple loads on the electrical outlet.
❏Be sure your AC power cord meets the relevant local safety
standards.
❏Never insert or disconnect the power plug with wet hands.
❏Power-supply cords should be protected from abrasion, cuts,
crimping and kinking. Be sure to place your cords to avoid
any damage. Do not place objects on top of the power cord
and the AC adapter or allow the power cord to be stepped on
or run over. You should take special care to try to keep the
power cord straight at the ends and the points where it enters
and leaves the transformer.
❏Keep out of reach of children.
❏For US and Canadian users
Use the included power cord or a 6 to 10 feet long UL-
approved type NISPT-2, 2 x 18 AWG cord with a 125 V 10 A
polarized plug and 125 V 7 A connector.
The AC Adapter is equipped with a polarized alternating-
current line plug (a plug having one blade wider than the
other) and polarized power inlet. These plug s only fit into a
power outlet and your equipment in one way. This is a safety
feature. If you are unable to insert the plug properly, try
reversing the plug. If the plug still fails to fit, contact an
electrician to replace your outlet. Be sure to use only the
polarized AC cord that comes with the scanner.