Note: If you’re installing on Macintosh OS 8.6 to 9.x, you may see a prompt to update your Carbon Library. After the CarbonLib installation is complete

and you’ve restarted your system, double-click the EPSON icon, then click Install to continue the installation.

5 Follow the on-screen instructions to install each program. Click Next or Finish (Windows) or Quit (Macintosh) to continue, as needed. Note that EPSON Smart Panel™ installs in several steps.

6 At the end of the installation, click Exit.

7 If you see a Product Registration screen, register your scanner as instructed. At the last screen, click Done or close your browser.

Connect the Scanner

After your software is installed, it’s time to connect the scanner.

1 Remove the sticker covering the transportation lock.

Caution: Do not turn the scanner over; this may damage the scanner.

2 Slide the transportation lock to the unlock position.

3 Remove the sticker from the back of the scanner.

Remove sticker

4 Connect the cable for the built-in transparency unit.

5 Connect the power cord and AC adapter, as shown.

AC adapter

Power cord