Epson 1670 Your First Scan

6 Connect the AC adapter to the scanner.

7 Plug the other end of the power cord into an electrical outlet.

The scanner turns on and the ] Start button light flashes green. It stops flashing and turns green when the scanner is ready.

Caution:

•It is not possible to change the AC adapter’s input or output voltage. If the label on the AC adapter does not show the correct voltage, contact your dealer. Do not plug in the power cord.

•Whenever you unplug the scanner, wait at least 10 seconds before plugging it back in. Rapidly plugging and unplugging the scanner can damage it.

8 Use the USB cable that came with your scanner. Plug the square end of the USB cable into the scanner’s USB port. Then plug the flat end into any available USB port on your computer.

Note: Your scanner may not work correctly if you use a USB cable other than the one supplied by EPSON or if you connect your scanner to a hub system.

Scanner Basics

Your First Scan

The ] Start button on your scanner automatically opens EPSON Smart Panel, making it easy for you to scan your images for many different uses. Here’s how you can use the ] Start button and Smart Panel to scan photos and save them as files.

1 Raise the scanner cover and place your photo face down on the glass. Make sure the top of the document is against the front edge of the scanner glass.

Then close the cover.