3.Press the red PPower button on the remote control or on top of the projector.

The projector beeps once and the Power light flashes green as the projector warms up, then an image begins to appear. When the Power light stops flashing and remains green, the projector is ready for use.

4.If you’ve connected a Windows-based computer to the projector, you may see a New Hardware Wizard screen saying your computer has found a plug-and-play monitor; if so, click Cancel.

5.If you are prompted to enter a password, see page 50.

warning

Never look into the lens when the lamp is on. This can damage your eyes, and is especially dangerous for children.

Selecting the Image Source

Selecting the image source lets you switch between images input from different pieces of connected equipment (such as a computer or DVD player).

If you don’t see the image you want, press the Source Search button on the projector or the Search button on the remote control until you see the image you want to project.

You can also use the Source buttons on the remote control to switch between devices connected to the ports identified on each button.. The PowerLite 1700c/1710c does not support EasyMPTM.

note

To focus and adjust the image, see page 20. If a projected image fails to appear, see page 18 for help.

Displaying and Adjusting the Image 17