note
If a button is pressed longer than 30 seconds, the remote control stops operating to conserve power. When you release the button, normal operation resumes.
Using the Remote Control
Follow these tips for using the remote control:
■Point the remote control at the front of the projector or at the screen.
■Stand within 20 feet of the projector.
■Avoid using the remote under bright fluorescent lamps or in direct sunlight, or the projector may not respond properly.
caution
When replacing batteries, take the following precautions:
■Replace the batteries as soon as they run out. If the batteries leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash immediately.
■Do not expose batteries to heat or flame.
■Dispose of used batteries according to local regulations.
■Remove the batteries if you won’t be using the projector for a long period of time.
Replacing the Batteries
Replace the batteries as described below:
1.Turn the remote control over.
2.Press down on the tab on the battery cover as you lift the cover off.
3.Install two AAA batteries, inserting the + and – ends as shown.
4.Position the cover as shown, then press down until it snaps into place.
26Using the Remote Control