2. Highlight User’s Logo and press Enter.

3.When you see a message asking Choose this image as the user’s logo?, select Yes and press Enter. A selection box displays over the image.

4.Use the pointer button to select the area of the image you want to use. Then press Enter.

5.When you see the message Select this Image?, highlight Yes and press Enter.

6.Use the arrow buttons to select a zoom rate (display size) and press

Enter.

7.When the message Save this image as the user’s logo? appears, select Yes and press Enter. Saving the logo may take a few moments. Do not use your projector, remote control, or video source while the logo is being saved.

8.When you see the message Completed, press Esc to return to the menu screen.

Choosing When to Display the Image

After your image is saved, it is automatically set as the startup screen. You can also set it to display as the screen you see when there’s no signal or when you press the A/V Mute button (see page 28).

1.Press the Menu button, highlight the Extended menu, and press

Enter.

54Fine-Tuning the Projector