2. Remove the right subframe from the right frame assembly.
3. Remove the following11 parts from theright frame assembly.
2 compression springs(200 g) 2 plain washers 1 spur gear (27 mm)
2 spurgears (34.5 mm) 1 spurgear (34 mm) 1 spur gear (21 mm)
1 combination gear(8 mm, 31.5 mm) 1 intermittentgear
Adjust the bidirectional print alignment. Refer to Chapter 4.
Mount the 11 parts above on the right frame assembly, as shown in the following figures.
Spur Gear
(21 mm)
Super Gear
(34.5 mm)
Spur Gear (34.5mm)
Spur Gear (34mm)
Combination Gear
(8mm/ 31.5mm)
Spur Gear (27mm)
Intermittent Gear
Compression Spring (200g)
Plan Washer
Compression Spring (200g)
Plan Washer
Figure 3-23 Engaging Gears1
FX-2170 ServiceManual Disassembly and Assembly
Rev.A 3-17