Stopping playback

Press .

To resume playback,

press .

Things to note when using resume

•Even if you press to turn off the power, play-

back resumes when you press .

•Resume cannot be used in the following situations.

-The disc is removed from the disc tray.

-After pressing to turn off the power and

pressing to turn the power back on.

- is pressed twice.

- If the main power switch is turned off.

•Resume cannot be used during program playback or random playback.

•The position from which playback resumes may be slightly different from where it was stopped.

•The audio language, subtitle language, and angle settings are memorized along with the stopping position.

•It is possible that resume cannot be used if the disc is stopped when the disc menu is displayed.

Turning off the power

1

Remove the disc from the disc tray.

2

Press

 

.

 

 

If the lamp was on, the lamp turns off and the Image Off light flashes orange (during cool- down).

“Now Cooling” appears in the display window above the DVD tray.

The confirmation buzzer beeps twice to indicate that cool-down has completed.

3 Turn off the main power switch.

If you only pressto turn off the power, MovieMate continues using electricity.

4 Replace the lens cover.

Keep the lens cover in place when the projector is not being used to protect the lens from dirt and damage.

The Image Off light flashes orange to indicate that the internal lamp cooling function (cool- down) is taking place. The buttons on the remote control and the main unit are disabled when cool-down is taking place (approximately 9 seconds).

Do not turn off the power or unplug the unit during cool- down as this may reduce the lifespan of the lamp.

14