The remote control does not | Is the Function/Numerics toggle switch in the [1 2 3] (numerical input) | |||
work | position? |
|
| |
|
|
| ||
| Depending on the disc, certain operations are prohibited. | - | ||
|
|
| ||
| Are the batteries dead, or have the batteries been inserted correctly? | |||
|
|
| ||
No sound can be heard or | Has the volume been adjusted to the minimum setting? | |||
the sound is faint. |
|
|
| |
Is mute mode active? Press | . | - | ||
| ||||
|
| |||
|
|
| ||
| Is the DVD level setting set to [DVD LEVEL 1]? | |||
|
|
|
| |
The audio distorts | Is the volume too loud? |
| ||
|
|
| ||
The audio/subtitle language | If multiple languages are not recorded on the disc, they cannot be | - | ||
cannot be changed | changed. |
|
| |
|
|
| ||
Subtitles do not appear | If there are no subtitles on the disc, they are not displayed. | - | ||
|
|
| ||
| Is the subtitle language set to “Off”? | |||
|
|
| ||
| When you use | - | ||
| after point A and point B. |
|
| |
|
|
|
| |
Solving problems using external video equipment
When this happens . . . | Check the following: | Reference | ||||
page | ||||||
|
|
|
|
| ||
|
|
|
|
| ||
No images appear | Is the power for the connected equipment turned on? | |||||
| Switch on the power to the connected equipment then start playback. |
| ||||
|
|
|
|
| ||
| When signals have been connected to both the | - | ||||
| the Video input port, only the |
| ||||
| watch the video equipment connected to the Video input port, |
| ||||
| disconnect the cable from the |
| ||||
|
|
|
|
| ||
“Signal not supported” is | If you cannot project even when the “Video Signal” is set to “Auto” in | |||||
displayed | the video Information menu, set to the signal format appropriate to the |
| ||||
| equipment. |
|
|
|
| |
|
|
|
|
| ||
“No signal” is displayed | Are the cables connected correctly? | |||||
|
|
|
|
| ||
| Is the power to the connected equipment turned on? | |||||
| Switch on the power to the connected equipment then start playback. |
| ||||
|
|
|
|
|
| |
| Press | to switch to the connected equipment. | ||||
|
| |||||
|
|
|
|
| ||
The signal is distorted | If an extension cable is used, electrical interference may affect the | - | ||||
| signals. Connect amplification equipment and check. |
| ||||
|
|
|
|
| ||
Image is cut off (too large) | MovieMate automatically recognizes and projects the aspect ratio for | - | ||||
or too small | the input signal. If the aspect ratio is not projected correctly, press |
|
|
| ||
|
| |||||
| and select the aspect ratio appropriate to the input signal. |
| ||||
|
|
|
|
| ||
Image colors are not right | In the video Information menu, set the “Video Signal” to the signal | |||||
| format appropriate to the equipment. |
| ||||
|
|
|
|
|
| |
55