Epson 30 Series manual 20

3.Press and release the H ink button. The P power and H ink lights flash.

If one of the cartridges is low or expended, the printer moves that cartridge to the _ expended ink mark. Go to step 4.

If no cartridges are low or expended, the print head moves to the ink replacement position. Go to step 5.

Note:

Do not hold down the H ink button for more than 3 seconds or the printer may start to clean the print head.

Caution:

Do not move the print head by hand; this may damage the printer. Always press the H ink button to move it.

Do not touch the flat white cable inside the WorkForce 30 Series.

4.Press the H ink button again.

■If another cartridge is low or expended, it moves to the _ expended ink mark.

■Once the printer identifies all of the low or expended ink cartridges, the print head moves to the ink cartridge replacement position.

20Maintaining Your Printer