ADJUSTING 90 DEGREE AND 45 DEGREE POSITIVE STOPS

The machine is equipped with positive stops that will quickly and accurately position the saw blade at 90° and 45° to the table. To check and adjust the positive stops, proceed as follows:

DISCONNECT MACHINE FROM POWER

SOURCE.

1.Remove the blade guard and splitter.

2.Raise the saw blade to its highest position.

3.Set the blade at 90° to the table by turning the blade tilting handwheel counterclockwise as far as it will go.

4.Use a combination square (A) Fig. 33 to see if the blade is at 90° to the table surface.

5.If the blade is not at 90° to the table, loosen set screw

(B)with 5/32″ allen wrench (C), and turn the blade tilting handwheel until the blade is 90° to the table. Turn set screw (B) clockwise until it bottoms.

6.Adjust the pointer (D) Fig. 34 to point to the zero degree mark on the scale by loosening screws (E), adjusting pointer (D), and tightening screws (E).

7.Turn the blade tilting handwheel clockwise as far as it will go and use a combination square to see if the blade is at 45° to the table.

8.If the blade is not at 45° to the table, loosen set screw

(F)Fig. 33, and turn blade tilting handwheel until the blade is 45° to the table. Turn set screw (F) clockwise until it bottoms.

9.Replace blade guard and splitter before using the machine.

D

A

F

B C

Fig. 33

E

Fig. 34

CHECKING BLADE ALIGNMENT

The saw has been aligned at the factory so the saw blade is parallel to the miter gage slots; however, it is recommended to check the alignment before initial operation as follows:

DISCONNECT MACHINE FROM POWER

SOURCE.

1.Place a combination square (A) Fig. 35, on the table with one edge of the square in the miter gage slot, as shown, and adjust the square so the rule just touches one of the teeth on the saw blade at the forward position, as shown in Fig. 35. Lock the square in this position.

2.Rotate the saw blade so that the same tooth you used in STEP 1 is in the rear position, as shown in Fig. 36, and check this distance. Both the front and rear measurements should be identical.

3.If an adjustment is necessary see “ADJUSTING

BLADE ALIGNMENT.”

Fig. 35

Fig. 36

19

Page 18 Page 20
Page 19
Image 19
Epson 36-714 instruction manual Checking Blade Alignment
Page 18 Page 20

36-714 specifications

The Epson 36-714 is a robust multi-functional printer that stands out in the competitive landscape of inkjet printing technology. Designed primarily for small to medium-sized businesses, this all-in-one device seamlessly combines printing, scanning, copying, and faxing capabilities into a single compact unit. The 36-714 is particularly known for its high-speed performance and exceptional print quality, making it an ideal choice for professionals looking to boost productivity without sacrificing quality.

One of the defining features of the Epson 36-714 is its advanced PrecisionCore technology. This patented technology enables the printer to deliver sharp, vibrant prints with a resolution of up to 4800 x 2400 DPI. The result is impressive color accuracy and detail, which is especially beneficial for businesses that require high-quality marketing materials, presentations, or detailed documents.

Another key highlight of the 36-714 is its enhanced printing speed. With the ability to print up to 25 pages per minute in black and white and 12 pages per minute in color, this printer minimizes downtime and maximizes efficiency. The device is also equipped with automated duplex printing, allowing users to print on both sides of the paper, which not only saves resources but also reduces paper clutter.

The 36-714 boasts an intuitive 4.3-inch touchscreen interface that simplifies navigation through its various functions. This user-friendly control panel enables quick access to print jobs, scanning options, and settings adjustments, making it easy for users of all skill levels to operate the printer effectively.

In terms of connectivity, the Epson 36-714 offers versatile options, including USB, Ethernet, and wireless capabilities. Users can easily connect the printer to their local network or use mobile printing options through Epson’s iPrint app or Google Cloud Print. This flexibility allows teams to print from multiple devices, whether they are in the office or working remotely.

Security features are also a significant consideration in today’s business environment. The Epson 36-714 addresses this with secure printing options and the ability to set user access controls to safeguard sensitive information.

Moreover, cost-effectiveness is a strong attribute of the Epson 36-714, as it utilizes Epson’s high-capacity ink cartridges. This helps to lower the cost per page, providing more economical printing over time.

In summary, the Epson 36-714 is a versatile, high-performance inkjet printer that excels in speed, quality, and connectivity. Its robust features and thoughtful design make it an essential tool for any business looking to enhance productivity while maintaining exceptional print standards.
Top Page Image Contents