CARTON CONTENTS

Fig. 1 Parts

1. Cast Iron Extension
Wings (2)
2. Switch Assembly
3. Fence Holder
Brackets (2)
4. Drive Belt
5. Table Insert
6. Wrench Hook
7. Miter Gage Holder
8. Splitter Mounting
Bracket
9. Blade Hex Nut
10. Blade Flange
11. 10” Carbide-
Tipped Blade
12. Blade Wrenches (2)
13. 4mm Hex Wrench
14. Dust Port
15. Locking Knobs (2)
16. Handwheel (2)
17. Miter Gage
18. Miter Gage Handle
19. Splitter/Guard
Assembly
Fig. 1
1
4
2
5
76
3
8
9
10
11
12
13
14
15
16
17
18 19
8

FOREWORD

FUNCTIONAL DESCRIPTION
The Delta 10” Hybrid Saw (36-714) has a powerful 13/4HP induction motor that can handle tough cutting operations.
This table saw has a maximum depth of cut of 31/8inches (79mm) at 90 degrees and 21/8inches (54mm) at 45 degrees.
The maximum dado width with this saw is 13/16 inch (21mm). The saw comes with two cast iron extension wings, one
of three fence systems, see-through blade guard and splitter, table insert, equipment mounting hooks, a 10" diameter
blade, dust port for 4" hose and miter gage.
NOTICE: THE PHOTO ON THE MANUAL COVERILLUSTRATES THE CURRENT PRODUCTION MODEL. ALL OTHER
ILLUSTRATIONS CONTAINED IN THE MANUAL AREREPRESENTATIVE ONLY AND MAY NOT DEPICT THE ACTUAL COLOR,
LABELING OR ACCESSORIES AND ARE INTENDED TO ILLUSTRATE TECHNIQUE ONLY.