LProof Sign-off:
ABE S.Takahashi K.Yoda_______
M.Miyazaki _______
ABE G.Kok _______
R4C1320 Quick Reference
Rev.D
A5 size QUICK.FM
6/18/01 Pass 0
20
2020
20

Error message list

Reset to Save You should reset the printer to
save the current settings.
ROM CHECK The printer is checking the ROM.
Self Test The printer is running a self-
diagnostic program.
Standby The printer is turned on, but is in
the energy-saving mode.
Warming Up The printer is warming up.
Writing ROM A The printer is writing data onto
the ROM in slot A.
Writing ROM P The printer is writing data onto
the program ROM module.
Messages Description
Can't Print
Duplex
The printer has encountered
problems during duplex
printing. Make sure you are
using an appropriate type and
size of paper for the Duplex Unit.
The problem could also be a
result of incorrect settings for the
paper source you are using.
Pressing the Continue button will
resume single-side printing.
Messages Description
Check Duplex P-
size
The size of paper being printed
on is different from the specified
paper size during duplex
printing and printing stops. Load
the specified paper source with
the correct paper size. Then
open the cover of the Duplex
Unit and remove any jammed
paper. The jammed page’s
print data is automatically
reprinted once you close the
cover of the Duplex Unit.
Check Media
Type
You have loaded media other
than transparencies when the
Paper Type setting in the printer
driver is Transparency. The
printer ejects the sheet without
printing on it. Load
transparencies into the
specified paper source, then
press the Continue button.
Check Paper
Size
The paper size setting is different
from the size of paper loaded in
the printer. Check to see if the
correct size of paper is loaded
in the specified paper source,
then press the Continue button.
Messages Description