R4C1320 Quick Reference
Rev.D
A5 size QUICK.FM
6/18/01 Pass 0
R
Proof Sign-off:
ABE S.Takahashi K.Yoda_______
M.Miyazaki _______
ABE G.Kok _______
5
55
5
❏To get the best print quality, do not store the
photoconductor unit in an area subject to direct
sunlight, dust, salty air, or corrosive gases (such as
ammonia). Avoid locations subject to extreme or
rapid changes in temperature or humidity.
wWarning:
Do not dispose of the used photoconductor unit in
fire, as it may explode and cause injury. Dispose of
it according to local regulations.
Always pay attention to the following handling
precautions before replacing the waste toner collector:
❏Do not reuse toner found in the waste toner
wWarning:
Do not dispose of the used waste toner collector in
fire, as it may explode and cause injury. Dispose of
it according to local regulations.
Always pay attention to the following handling
precautions before replacing the print head filter:
❏Do not reuse toner found on the print head filter.
wWarning:
Do not dispose of the used print head filter in fire, as
it may explode and cause injury. Dispose of it
according to local regulations.
Replacing the photoconductor unit, waste toner collector, and print head filter
Follow these steps to replace the photoconductor kit:
1. Turn off the printer.
2. Open the front cover.
3. Detach the waste toner collector, as shown below.
Note:
Be careful not to spill toner when handling the waste
toner collector.