100 Using the Projector on a Network
press Enter. To toggle symbol settings or capital letters, highlight
the option and press Enter. When you’re done, highlight Finish
and press Enter.
7. When you’re done making these settings, press Esc. Choose
Complete and press Enter, then choose Yes and press Enter to
save your settings.
Enabling Data Encryption from EasyMP Network Projection
When using the EasyMP Network Projection software, follow these
steps to enable data encryption.
1. Click Set options on the main screen.
2. Click the General Settings tab.
3. Select the Encrypt communications checkbox.
4. Click OK.
For more information, see the EasyMP Network Projection Operation
Guide.
note
If the password is longer
than 32 characters, enter it
by accessing the projector
from a web browser. This
lets you enter up to 63
characters. See page104 for
details.