80 Using the Projector Menus
■Power On Protect: Prevents unauthorized use of the
projector. After the projector is plugged in and turned on,
you must enter a password to use the projector. Select On,
press Enter, then press Esc to return to the Password Protect
screen.
■User’s Logo Protect: Prevents your custom screen (see
page 81), display, and User’s Logo settings in the Extended
menu from being changed. Select On, press Enter, then press
Esc to return to the Password Protect screen.
■Network Protect: Prevents any of the network settings from
being changed. Select On, press Enter, then press Esc to
return to the Password Protect screen.
3. Use the arrow buttons to select Password and press Enter.
4. When you see a message asking if you want to change the
password, select Yes and press Enter.
5. Hold down the Num button and use the numeric keypad to enter
a four digit password.
6. When you see a confirmation message, re-enter the password.
7. Press the Menu button, then press Enter to exit the screen.
8. Turn off and unplug the projector.
Starting the Projector With a Password
When the password function is enabled, you see this screen when you
plug in and turn on the projector:
Hold down the Num button and use the numeric keypad to enter the
four digit password.
Hold down
note
If you leave the projector
p
lugged in, the Password
screen will not appear. It
appears only if you unplug
and reconnect the power
cord.