Using the Projector Menus 83

Choosing When to Display the Image

After your image is saved, you can set it to display as the startup
screen, the screen you see when there’s no signal, or the screen you see
when you press the A/V Mute button (see page 60).
1. Press the Menu button, highlight the Extended menu, and press
Enter.
2. Select Display and press Enter.
3. Choose from these display options:
Set Display Background to Logo to display your image
when there is no signal.
Set Startup Screen to On to display your image when the
projector is warming up.
Set A/V Mute to Logo to display your image when you press
the A/V Mute button.
4. When you’re finished, press Menu to exit.
Disabling the Projector’s Buttons
When you enable the Control Panel Lock function, you can lock all of
the projector’s buttons, or all of the buttons except the Ppower
button. The remote control can still be used to operate the projector.
1. Press the Menu button, highlight the Settings menu, and press
Enter.
2. Select Control Panel Lock and press the Enter button.
3. Select Full Lock (to lock all projector buttons) or Partial Lock (to
lock all buttons except the Ppower button) and press Enter.
4. Select Yes and press Enter to confirm the setting.
note
You can lock these settings to
prevent them from being
changed without a password
(see page79).