82 Using the Projector Menus
Capturing the Image
Start by displaying the image you want to use from either a computer
or video source, such as a DVD player or digital camera. Then follow
these steps to capture the image and transfer it to the projector:
1. Press the Menu button on the remote control, highlight the
Extended menu, and press Enter.
2. Highlight User’s Logo and press Enter.
3. When you see a message asking Choose this image as the
User’s Logo?, select Yes and press Enter. A selection box
displays over the image.
4. Use the arrow buttons to select the area of the image you want to
use. Then press Enter.
5. When you see the message Select this image?, highlight Yes
and press Enter.
6. Use the arrow buttons to select a zoom factor (display size) and
press Enter.
7. When the message Save this image as the User’s Logo?
appears, select Yes and press Enter. Saving the logo may take a
few moments. Do not use your projector, remote control, or
video source while the logo is being saved.
8. When you see the message Completed, press Menu to exit.
note
When you choose an image
f
or the user’s logo, it erases
any previously used image.
You can save an image up to
300 × 400 pixels in size.
Once you have saved a new
user’s logo, you cannot
return to the factory default
logo.