Using the Built-in Toolbar
You can use either pen with the built-in toolbar, but not both pens at the same time.
1. Press one of the Source buttons on the remote control to select the source for the image you want to
annotate. If you simply want to use a blank screen, press the Computer button and select
Computer2 or another unused source.
Note: You cannot use the built-in toolbar if you select the same source that is selected for Easy
Interactive Tools in the Extended menu.
2. To activate the toolbar, tap the projection surface with the pen.
You see arrow icons on the left and right side of the projected image.
Note: The toolbar arrows disappear if they are not used. To make them reappear, tap the projection
surface with the pen.
3. To display the toolbar, select one of the arrows.
Note: You can use the pen to move the arrows up or down.
4. To close the toolbar, select the icon at the bottom of the toolbar.
Note: If you want to hide the toolbar automatically after drawing, select the icon at the bottom of the
toolbar.
Parent topic: Using BrightLink Without a Computer
Related references
Projector Setup Settings - Extended Menu
Built-in Tools for Use Without a Computer
The built-in toolbar is embedded in the projector and provides fewer functions than Easy Interactive
Tools. For example, you cannot save your work with the built-in toolbar. If you want to save, connect a
computer to the projector and use Easy Interactive Tools.
144