Note: If you want to use a web browser to select settings when the projector is turned off, you need to
adjust the Standby Setup settings in the Extended menu.
1. Make sure the projector is turned on.
2. Start your web browser on a computer connected to the network.
3. Type the projector's IP address into the browser's address box and press the computer's Enter key.
You see the Web Control screen.
4. To select projector menu settings, select the name of the menu and follow the on-screen instructions
to select settings.
5. To control projection remotely, select the Web Remote option.
You see this screen:
1 Power button control
2 Selects Computer port source
3 Selects Video,S-Video, and HDMI port sources
4Freeze button control
5A/V Mute button control
6Page Up and Page Down button controls
68