EPSON PhotoPC 500
Use the EPSON PhotoPC 500 imaging software and the EPSON Photo! TWAIN and Utility Driver to transfer pictures to the PC; see the EPSON PhotoPC 500 User’s Guide for Windows for instructions.
Note:
DB9
Attach to
EPSON Photo! Twain and Utility Driver automatically chooses the fastest speed that works with your operating system. If you get an ~YYOY message when you try to download photos to the PC, the camera’s port speed may befaster than the port speed configured for your PC. You can configure the camera for any of the following port speeds:
115,200 (Windows 95 and NT)
57,600
38,400
19,200
Connecting the Camera to a Macintosh
Follow these steps to connect the camera to a Macintosh to transfer pictures:
1.Press on the arrows on the camera’s port cover and slide up the cover. (If you have an EPSON PhotoPix LCD monitor attached to the camera, tilt it up to expose the port cover.)
2.Locate the Photo PC 500 cable. Line up the arrow on the cable connector with the notch on the camera’s serial port, as shown. Insert the connector.
3.Attach the DB9 connector on the Photo PC 500 cable to the DB9 connector on the Mac adapter cable; tighten the screws.
\ |
| Photo PC |
Attach to | DB9 | 500 cable |
computer |
| |
| connector | |
4.Connect the other end of the Mac adapter cable to either the printer port or the modem port on your Macintosh.
5.Turn on the camera and the Macintosh system. A line appears at the bottom of the picture counter on the camera’s control panel.
Note:
When the camera is connected to the Macintosh, you cannot use the shutter button or any of the control buttons.
Use EPSON PhotoPC 500 imaging software and the EPSON Photo! TWAIN and Utility Driver to transfer pictures to the Macintosh; see the EPSON PhotoPC 500 User’s Guide for Macintosh for instructions.
Note:
EPSON Photo! Twain and Utility Driver automatically chooses the fastest speed that works with your operating system. If you get an ~YYOY message when you try to download photos to the Macintosh, the camera’s port speed may be faster than the port speed configured for your Macintosh. You can configure the camera $Y ax;6$;hejbllowing port speeds:
38:400
19,200
EPSON PhotoPC 500 - 4 | 10/96 | Digital Camera |