Epson 500 Attaching the Optional PhotoPix LCD, Other Optional Accessories, Detaching the Optional PhotoPix LCD, Installing a PhotoSpanTM Memory Module

EPSON PhotoPC 500

Attaching the Optional PhotoPix LCD

Follow these steps to attach the optional EPSON PhotoPix LCD monitor to the camera:

Make sure your camera is turned off. Set the PhotoPix LCD monitor’s mode switch to the OFF position.

Pressing on the arrow on the LCD inlet cover with your thumb, slide the cover away from the camera. (Put the cover in a safe place.)

Position the PhotoPix LCD monitor beside the camera. The display should be facing you.

While holding the camera with one hand, carefully slide the LCD connector into the LCD inlet. Make sure it is firmly in place.

LCD

corm

Other Optional Accessories

You can increase the camera’s storage capacity by installing a 2MB or 4MB PhotoSparP memory module, as described in this table:

		With 2MB	With 4MB
	2MB internal	PhotoSpan	PhotoSpan
Number of photos	memory	A882401	A882411
At high resolution	30	65	100
At standard resolution	60	130	200

See the EPSON PhotoPC 500 User’s Guide for instructions on installing a PhotoSpan module.

You can connect the PhotoPC 500 to a standard electrical outlet using the AC adapter (B867027) to save power when transferring pictures to the Macintosh or PC, or operating the camera from either system. The adapter does not charge the camera’s batteries.

Optional 37mm video camcorder lenses or filters may also be used for taking close-up, wide-angle and special effects pictures. To attach a lens, screw it on the camera as shown:

Detaching the Optional PhotoPix LCD

Follow these steps to detach the PhotoPix LCD monitor from the camera:

1.Turn the camera off, and set the PhotoPix LCD monitor’s mode switch to OFF.

2.Place the camera on a flat surface with the back facing you.

3.Holding the camera with your right hand, use your left thumb to press the release button on the LCD connector.

release

4.While holding down the button, carefully push the PhotoPix LCD monitor away from the camera; do not pull the monitor.

5.Replace the LCD inlet cover on the back of the camera.

Installing a PhotoSpanTM Memory Module

Before you install a PhotoSpan memory module, make sure you download all the pictures in the camera to the computer, then erase them from the camera and turn the camera off.

CAUTION:

PhotoSpan modules are sensitive to static electricity and easily damaged. Ground yourself by touching a metal object before you handle the module, and never touch the module’s metallic area.