40 Receiving Faxes
One-touch dial button: Press a button on the right side of the control panel to
select one of the first five speed dial/group dial entries and press OK. Press 1 to
enter another entry or press 2 to continue.
If you’ve connected a telephone to the product, dial
the number from the phone. Press 1 to confirm.
Note:
Don’t hang up the phone until you begin transmitting the fax.
Receiving Faxes
Before receiving faxes, make sure you load plain paper and select the Paper Size
setting that matches the size of paper you’ve loaded. If the incoming fax pages are
larger than the paper size you loaded, the fax size is reduced to fit or printed on
multiple pages, depending on the Auto Reduction setting you select. See your
online User’s Guide for instructions.
To receive faxes automatically, make sure the
Auto Answer light is turned on. To turn it on, press the
Auto Answer button, then press OK.
Note:
To change the number of rings before the product answers,
see page38.
If you run out of paper during printing, you see the error
message Paper out. Load more paper and press the OK
button to continue.
To receive faxes manually, turn off the AutoAnswer light and follow these steps:
1. When your telephone rings, lift the phone off the hook.
2. Press 2 to receive the fax, then press 1 at the next screen.
3. After all the pages are received, you see the Fax ready screen. Replace the
phone on the hook.
4. Press OK to print the fax.
Auto Answer
Redial/Pause
Speed Dial/
Group Dial
BS
Auto Answer
light