36 Using Epson MovieMate with Other Equipment
Playing Projector Audio Through an External Audio System
You can connect the projector to an amplifier, a 5.1 Stereo Surround Sound System, or a
digital audio recorder. To output sound from the projector, the external equipment needs to
have a digital coaxial (S/PDIF) audio input port.
You will also need a digital coaxial cable, which may be provided with your external
equipment, or may be purchased from an electronics store.
1. Make sure the equipment is turned off, then connect the cable as shown:
2. Turn on your audio equipment and play your movie, music, or other presentation with
sound from your projector.
3. You may need to change the Digital Output setting in the Audio Setup Page. Select
Stream if you are connecting a DTS/Dolby Digital Decoder or PCM if you are
connecting to equipment that is only compliant with linear PCM. For more information,
see page51.
You can use any of your projector’s audio controls, as described on pages 25 and 29.
Digital coaxial cable