Doing More with EpsonMovieMate 51
Adjusting Dolby Audio Settings
You can adjust settings for external equipment with a DTS/Dolby
Digital Decoder or DVDs recorded in Dolby Digital.
1. Press the button on the remote control. You see the Language
Setup Page.
2. Press to display the Audio Setup Page.
3. Press to highlight Digital Output or Night Mode, then press to select it. You
can select the following settings:
■Digital Output: Change to Stream if you have connected a DTS/Dolby Digital
Decoder to the Audio-Out port.
■Night Mode: Turn this setting on if you are watching a Dolby Digital DVD at low
volume.
4. Press or to select the setting you want to change, then press to save it.
5. To exit the menu, press .
Setting Video and Other Options
You can use the Visual Setup menus to adjust the signal format for external video equipment
and set other options.

Option Menu

1. Press on the remote control. You see the Visual Setup menu.
2. Press to highlight Option, then press to select it.
3. Press until you see the option you want to set.
You can adjust the following items:
■Mic Input Volume: Adjust this setting if the microphone level is too low or too high.
■User Button: You can assign one of the following five items to the User button:
Power Consumption, Info, Zoom, Resolution, Ceiling Projection. By pressing the
button, the assigned menu item selection/adjustment scre en is displayed, allowing
you to make one-touch settings/adjustments.
■Child Lock: Turn this setting on to lock the button on the control panel. See
page 47 for more information.
■High Altitude Mode: Turn this setting on if you use the projector at an altitude
above 4900 feet (1500 meters), to ensure that the projector does not overheat.