54 Caring for Your Epson MovieMate
Caring for Your Epson MovieMate
The projector needs little maintenance. All you need to do on a regular basis is keep the lens
clean. You also may need to clean the air filter to help prevent overheating.
Warning: Before you clean any part of the projector, turn it off and unplug the power cord. Never
open any part of the projector, except as described in this User’s Guide. Dangerous electrical
voltages in the projector can injure you severely. Do not try to service this product yourself, except
as specifically explained in this User’s Guide.
The only parts you should replace are the lamp and air filter. If another part needs replacing,
contact Epson or a qualified servicer (see page 69).
Follow the instructions in this section to clean the lens and case, clean a nd replace the air
filter, replace the lamp, and store or transport the projector.

Protecting Epson MovieMate

The projector is designed for use virtually anywhere at home. However, the projector and its
accessories should not be exposed to water, smoke, direct h eat or sunlight, or left outside for
long periods of time. As with other electronic equipment, please avoid exposure of the
projector to moisture, dust, smoke, and other environmental factors which may result in
damage to internal electronics over time. See the warranty brochure included with your
projector for additional details on the use of the projector.

Cleaning the Lens

Clean the lens whenever you notice dirt or dust on the surface.
To remove dirt or smears, use lens-cleaning paper. If necess ary, moisten a soft cloth with l ens
cleaner and gently wipe the lens surface.
Caution: Never rub the lens with abrasive materials.