Problem Solving 67

There is a problem with the sound quality.

■Try pressing the button on the remote control and adjusting the sound mode. (Make
sure the toggle switch on the remote control is set to the Func- position.)
■If you’re using external equipment, you may need to adjust the Audio settings in the
setup menu (see page 51).
■If the sound is distorted or too loud, try pressing the — Volume button on the projector
or on the remote control.

No sound can be heard from the microphone.

■Make sure the microphone is connected correctly. See page 31.
■Increase the Mic Input Level. See page 31.
■The projector is compatible with dynamic microphones. Make sure you are not using a
plug-in power microphone.

Subtitles do not appear.

■The DVD might not include subtitles.
■Make sure the subtitle language is not set to OFF (see page44).

You can’t change the language on a DVD.

The DVD might not include multiple languages.
Problems with External Video Equipment

No picture appears on the screen.

■Make sure the equipment is turned on.
■Press the button on the projector or the button on the remote control.
■Press the or Play button on the external equipment.

You see the message No Signal.

■Make sure the equipment is turned on.
■Make sure your cable(s) are connected correctly (see page 32).