note

Each input port has its own dedicated audio output jack. To play sound from a source, you must connect the audio cable to the correct audio output jack.

When you switch the video source, the projector automatically plays sound from the new source.

For Stereo Mini-Jack Audio Output Ports

Some video devices, especially camcorders, may have a stereo mini-jack audio output port. In this case, use a commercially-available stereo mini jack audio cable to connect to the projector, as shown below:

1.Connect one end of the audio cable to the Audio jack corresponding to your video source. For example, if you’ve connected your video device to the projector’s S-Videoport, connect the adapter to the Audio jack next to it.

2.Connect the other end to your video device’s audio output port.

If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 30 for instructions.

28Setting Up the Projector