Nothing appears on the external monitor.
■Make sure the VGA computer cable is connected to your computer’s video port and the projector’s
Computer1/Component Video1 port. It will not work if you connected the computer cable to the projector’s
Computer2/Component Video2 port.
■Make sure the cable from your monitor is connected to the projector’s Monitor Out port.
You see a blue screen with the message No Signal displayed.
■Make sure the cables are connected correctly, as described in Chapter 1.
■Make sure the power to your computer or video source is turned on.
■If you’ve connected a computer and one or more video sources, you may need to press the Source Search button on the projector or the Comp 1, Comp 2,
■If you’ve connected a laptop computer, make sure it’s set to display on an external monitor. See page 33.
If you’re using a PC laptop:
■Hold down the Fn key and press the function key that lets you display on an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD. Allow a few seconds for the projector to sync up after pressing it. Check your laptop’s
manual or online help for details.
On most systems, the 
or CRT/LCD key lets you toggle between the LCD screen and the projector, or display on both at
the same time.
84Solving Problems