You will need the optional projector mount designed for the projector. See page 11 for ordering information.
Warning: When installing or adjusting the ceiling mount, do not use adhesives to prevent the screws from loosening and do not use any type of oil or lubricant. These may cause the projector casing to crack and the projector may fall, causing serious injury and serious damage to the projector.
Follow the instructions included with the mount to install the projector, which weighs
11.5pounds. The wall or ceiling where you install it must be capable of supporting a weight of 58 pounds.
In addition to the tools supplied with the projector mount, you will need a Phillips head screwdriver and a drill to use on the wall or ceiling.
If you install the projector on the ceiling, you will need to invert the picture so that it appears right side up. Follow these steps:
1.Press the Menu button on the remote control.
2.Press the menu navigation buttons to open the
Settings menu, then select Projection.
3.Use the navigation buttons to select Front/Ceiling.
4.Press the Menu button when done.
Menu button
Menu navigation buttons
If you are planning to use an AV controller with the projector, refer to the table of ESC/VP21 command codes on page 65.
Setting Up the Projector 17