Replacing the Lamp
The life span of the lamp is up to 3000 hours.
You can check how long the lamp has been used as described on page 44. If the number shown is close to the limit, make sure you have a spare lamp handy.
Note: Turn off this product when not in use to prolong the life of the projector.
It’s time to replace the lamp when:
Lamp warning light
■The projected image gets darker or starts to deteriorate.
■The lamp warning light flashes orange.
■The message Replace the lamp appears on the screen when you start projecting.
Caution: If you continue to use the lamp after you see the replacement indicators, the lamp is more likely to break.
You can purchase a new lamp (part # V13H010L43) from an Epson authorized reseller. To find the nearest reseller, call
Be sure to read the safety instructions in the Quick Guide before replacing the lamp.
Follow these steps to replace the lamp:
1.Turn off the power and disconnect the power cord.
2.If the projector has been on, let it cool for at least an hour.
Warning: Let the lamp cool before replacing it. If the lamp breaks, handle the shards carefully to avoid injury.
48 Caring for Your Epson MovieMate