Problems with External Video Equipment

No picture appears on the screen.

■Make sure the equipment is turned on.

■Press the button on MovieMate or on the remote control.

■Press the or Play button on the external equipment.

■Make sure you don’t have cables connected to more than one video port. You can only use one connection at a time (see page 23).

You see the message No Signal.

■Make sure the equipment is turned on.

■Make sure your cable(s) are connected correctly (see page 23).

■Press the button on MovieMate or the remote control to select the external video source. Allow a few seconds for MovieMate to sync up.

You see the message Signal not supported.

Press the button on the remote control and check the Video Signal setting (see page 43).

The picture is cut off (too large) or too small.

Press the button on the remote control and select the appropriate aspect ratio.

The picture is distorted.

■If you’re using an extension cable, electrical interference may affect the signal.

■Check the solutions on pages 55 and 56.

The colors are not right.

■Press the button on the remote control and check the Video Signal setting (see page 43).

■ Press the

 

 

button on the remote control to select the best setting for your viewing

 

environment.

 

■Adjust the Color Saturation or Tint settings. See page 41.

58 Problem Solving