7.Press the 
cleaning button to begin charging the ink delivery system and close the printer cover.
Charging takes about a minute. The 
power light flashes and the printer makes various sounds until it’s finished. Don’t turn off the printer or interrupt the charging process or it will start over, using more
ink than necessary. Charging is finished when the 
power light stops flashing and stays on.
Caution:
Never turn off the printer while the 
power light is flashing, unless the printer hasn’t moved or made any noise for more than
5 minutes.
4 Load Paper
1.Open the output tray extensions. Slide the left edge guide right until it is a little wider than your paper.
left edge guide
2.Load a stack of plain paper with the printable side up and place it against the right edge guide. Then slide the left edge guide up against the paper’s left edge. Don’t load paper higher than the arrow on the guide.
Load paper only up to this arrow
Slide paper against the right edge guide