Beyond the Basics
frequently asked questions
Q - I set up my mixer according to the instructions. Why isn’t it working?
A- Make sure you are connected to a “live” AC outlet.
-Verify that all sources are securely connected.
-Check the fuse and replace it if needed.
Q - Why is there no signal from my input source?
A- Make sure OFF/ON/TALKOVER is not set to TALKOVER.
-Make sure the input source is turned on.
-Check the mixer and source control settings.
-Check connections between the mixer and input source.
Q - Why do I hear a humming noise from the PHONO source?
A - Make sure the PHONO 1 or PHONO 2 source’s ground wire is connected to the mixer’s GND terminal.
Q - Why do I hear a humming noise from another input source?
A - Make sure there are no
Q - Why am I getting microphone feedback (squealing)?
A - Move the microphone further away from the output speakers or use a directional microphone.
17
