Basics Connecting inputs, Connecting power | Radio Shack 32-2057

The Basics

connecting inputs

MIC — connect a microphone with a 1/4-inch plug here (not supplied).

PHONO 1/2 — connect up to two low-level audio sources (turntable) to your mixer. If you connect

amagnetic-cartridge turntable, connect its ground wire (usually black or green) to GND.

GND

LINE 1, 2, 3, 4 — connect line level inputs from up to four audio sources to your mixer. Do not connect audio sources with line-level outputs to the PHONO 1 or PHONO 2 input jacks.

connecting power

Connect the mixer’s power cord to a standard AC outlet.

7

Image 7

Radio Shack 32-2057 quick start Basics Connecting inputs, Connecting power

Contents

Channel Stereo Sound Mixer What’s included Contents Important Safety Instructions Basics Basics Connecting outputs Setting up your mixer Connecting power Basics Connecting inputs Listening safely Basics Connecting a lamp and headphones Presetting input signal levels Using your mixer Basics Presetting audio input sources Set OFF/ON/TALKOVER to OFF Presetting the microphone Beyond the Basics Sound check Beyond the Basics Mixing your inputsPlaying an input source Beyond the Basics Monitoring a second input source Switching to a second input source Using talkover Using a microphone Left Channel Using the seven band equalizer Frequently asked questions Care Service and repair Replacing the fuse Input Sensitivity/Impedance Speciﬁcations Limited one-year warranty Accessories