Wired LAN Related
Q1 <Wake On LAN> function
A<Wake On LAN> is a function that activates the system in rest mode when a signal (such as ping or magic packet commands) arrives from network (wired LAN).
To use <Wake On LAN> function:
1.Click Start > My Computer > My Network Places > View network connections.
2.Click the right button on the touchpad over Local Area Connection, and select Properties.
3.Click Configure, and select Power Management tab. Select ’Allow this device to bring the computer out of standby’, then click OK. Restart the system.
-If the system in rest mode is activated when there is no received signal, use the system after disabling <Wake On LAN> function.
-Connecting wired LAN while using wireless LAN may not execute <Wake On LAN> function. Configure wireless LAN to ’Disable’ to use <Wake On LAN> function.
